What's new

Oliver Acoustic Research AR-94 specifications
Daniel Azziorri RCA new topic
Roy A. Esposito Acoustat topic reply
Joe Kasperowski Acoustat topic reply
Ed Optimus topic reply

Another history on dynamic loudspeakers

Another history

Nikola Tesla is believed to have put electrically charged carbon dust in a cup-shaped device to create the first telephone loudspeaker. However, the first documenteddevice that might fit this description was created in 1881.

Alexander Bell patented the first loudspeaker as part of his telephone in 1876. This was soon followed by an improved version from Ernst Siemens in Germany and England (1878). The modern design of moving-coil loudspeaker was established by Oliver Lodge in England (1898).

The moving coil principle was patented in 1924 by two Americans, Chester W. Rice and Edward W. Kellogg. There is some controversy in that an application was made earlier by the Briton Paul Voigt but not granted until later. Voigt produced the first effective full range unit in 1928, and he also developed what may have been the first system designed for the home, although using electromagnets rather than permanent magnets.

These first loudspeakers used electromagnets because large, powerful permanent magnets were not freely available at reasonable cost. The coil of the electromagnet is called a field coil and is energized by direct current through a second pair of terminals. This winding usually served a dual role, acting also as a choke coil filtering the power supply of the amplifier which the loudspeaker was connected to.

The quality of loudspeaker systems until the 1950s was, to modern ears, very poor. Developments in cabinet technology (e.g. acoustic suspension) and changes in materials used in the actual loudspeaker, led to audible improvements. For Example, Paper cones (or doped paper cones, where the paper is treated with a substance to improve its performance) are still in use today, and can provide good performance. Polypropylene and aluminium are also used as diaphragm materials. Additional improvements to loudspeaker technology occurred in the 1970s, with the introduction of higher temperature adhesives, improved permanent magnet materials, and improved thermal management.